What should you do if your pool water is very milky and shocking makes it more milky but the levels are good?

Crystel Kreiger asked a question: What should you do if your pool water is very milky and shocking makes it more milky but the levels are good?
Asked By: Crystel Kreiger
Date created: Tue, Apr 20, 2021 3:29 PM

Content

FAQ

Those who are looking for an answer to the question «What should you do if your pool water is very milky and shocking makes it more milky but the levels are good?» often ask the following questions:

🎱 Your pool water is very milky shocking makes it more milky levels are good?

Try hitting it with a clarifier, your pool shop will have it in stock. First hit it with an algaecide then cast a clarifier over the surface of the pool and let it rest without the pump going for at least a full 24 hours. At that time you will notice that the pool water is clear except a layer at the bottom, carefully vacuum this layer out to waste, do not put it through the filter

🎱 What should you do if your pool water is very milky and shocking makes it more milky?

First hit it with a copper based algae side. If that doesn't start clearing it up Go to the pool shop and get a strong clarifier. Turn of the filtration equipment and cast the clarifier evenly over the water and let it settle for a couple of days. you will note that the water is now crystal clear except for a layer at the bottom of the pool. Gently vacuum this layer to waste. Do not put it through your filter. Then top up the pool.

🎱 Your pool water is milky help?

If your pool water is ever milky you have too much or not enough chlorine

1 other answer

== ==

Your Answer

We've handpicked 21 related questions for you, similar to «What should you do if your pool water is very milky and shocking makes it more milky but the levels are good?» so you can surely find the answer!

What makes pool water blue?

  • Pool Chemicals Turn Pool Water Blue. Pool water is dyed blue by the chemicals used to keep it healthy. Chlorine is added to pools to keep the water clear. It is not a dyeing agent.

Read more

What makes pool water dense?

pool noodles too much chlorine in pool

If you have, you might have noticed that it's easier to stay afloat in the saltwater than it is in a lake, pond or swimming pool. Why is that? Salt dissolved in the water makes it more dense.

Read more

Should filter be on when shocking pool?

While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Read more

Should you adjust ph before shocking pool?

Lower the pH before shocking, 7.2 – 7.4 is best for shock efficacy. Dilute pool shock in a bucket of water for vinyl liner pools… Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

Read more

What should pool bromine levels be?

All the halides (chlorine, bromine, iodine) work at about the same level. 4-8ppm to disinfect, less to keep clean.

Read more

How full should your pool water be?

  • The perfect level is for the water level to be at the halfway point on the skimmer hatch along the side of the pool. It's acceptable for the water to fall anywhere from the one-third to one-half way mark, but if the water level is below or above this range, you should add or remove water to return the water level to an optimal range.

Read more

How to clear cloudy pool water after shocking?

Sometimes you'll get cloudy pool water after shocking. This is common and should dissipate over time. Just keep your filter running and it should clear up. Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite).

Read more

Why does soda ash make my pool water milky?

  • When we dump a large slug of soda ash into the pool, we temporarily create a small area of high pH, perhaps in the 10 range, which causes precipitation of calcium carbonate. If a small amount of calcium carbonate is precipitated producing some cloudiness, it generally and gradually, usually within minutes, re-dissolves and clears up.

Read more

How often should you test your pool chlorine levels?

  • A high-use, full-sun pool might consume about 3-4 ppm per day or more. Home testing is critical to maintaining a clear and balanced pool. You should test your chlorine levels daily to make sure your chlorine levels are adequate.

Read more

What makes your pool green?

utot

Read more

What makes pool water turn yellow?

  • In pool water, chlorine ions immediately mix with water molecules to form colorless hypochlorous acid. If you see a yellow color in the water, it's usually caused by minerals--primarily iron. Iron is a common contaminant in wells and municipal water systems, and while it may be troublesome, it isn't a health hazard.

Read more

How long should pool pump run after shocking?

Add it during the day, and the sun will just burn most of it off, reducing its effectiveness. So when you shock your pool, you'll definitely want to run your pump at night, and for a minimum of eight hours to fully distribute the shock.

Read more

How long should you run pool pump after shocking pool?

too much chlorine in pool pool chlorine levels chart

Apply the shock at night time, as sunlight burns up chlorine and greatly reduces its effectiveness. Run your pump (at night) for at least 8 hours to ensure good distribution.

Read more

Why is my pool water still green after shocking?

  • Shocking a pool should help clear up a green pool if the water is green because of algae or other issues. However, the pool may turn green after shocking, which is caused by an increased amount of dissolved copper in the water.

Read more

What makes a good pool towel?

Fabric: Cotton, microfiber and terry

All the experts we consulted agreed that cotton is the best fabric when it comes to beach towels and they recommended those made with 100 percent cotton. Cotton can be more soft and absorbent while also drying quicker, said Lundgren.

Read more

What makes pool water blue and cloudy?

The major reason for cloudy blue pool water would be inconsistent chlorination. For a list of other reasons, please refer to the related link.

Read more

When should you replace the water in your salt water pool?

If used often, every day or every two days. If not used often, at least once every week. That's crazy, we leave our water in year round and do a start up every spring. The salt produces chlorine at a lower level that a conventional pool. If you are changing 5000-10,000 gallons of water every few days, no wonder there is a shortage of water. Find out how to operate your pool properly and save water. When the pool water reaches 800-1000ppm of calcium hardness or exceeds 100ppm of cyanuric acid it is time to change the water. It could take 1-8 years for this to happen.

Read more

How long should you run filter after shocking pool?

Vacuuming After Shock

Shock the pool with either the liquid or granulated chlorine shocks. Let the filter run for 24 hours before adding any other chemicals.

Read more

How do i fix cloudy pool water after shocking it?

Cloudy or milky water after shocking is normal, and the water should clear up within an hour or so. Just make sure your pump and filter are running properly. If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy.

Read more

Do you have to cover your pool after shocking?

  • Keeping the pool covered after shocking is susupected of causing persistant CC. If you have a SWG and no CC (or less than .5 CC ) then shocking is NOT needed, btw. YOu might want to read these water balance tips for SWGs. She's shocking because of a dead toad. You must log in or register to reply here. How do I shock my pool with HDH?

Read more

How long after shocking your pool can you swim?

12-24 hours

Read more